Zhangshan Hengxing Electronic Co., Ltd.
Address:2 Yongqiang Rd, Zhaolong Industrial Park,Dongsheng Zhongshan-528414 Guangdong China
Tel:0760-22821378
0760-22229872
0760-22224078
Fax:0760-22229873
Zip code:528414
E-mail:hx@hengxinhengqi.com
ACS-SERIES
Price Computing Scale
OPERATION MANUAL
User Guidance
1. Parameter Setting
Turn on the scale, press and hold “ UNIT ” key for 1 second more until the scale
enter parameter setting mode.If you need to set division, press “CE” key, if set auto on/off,
press “CG” key, if set decimal digits, press “.” key.
The end,return to weighing mode
Two division available:H1:1/6000;L:1/3000
Auto Off: A-o:No Auto off. A-1: Automatically shut down in 15 minutes.
2. Screen Brightness Adjustment
LED type: in normal weighing mode, press 
, 3
different brightness can be choosed.
LCD type: in normal weighing mode, press 
, 2
different brightness can be choosed.
(Or no backlight)
3. Battery status
LCD type: You can directly see the battery status from the battery mark in Unit Price screen
(e.g. 
four
battery level, 
two
battery level)
LCD/LED type: When the scale is on, press and hold Electricity key for 1 second and then you can see
the battery status.( E.g.
indicates four battery gauge,
indicates two battery gauge.)
4. Unit Price Storage Function: You can use “M1”- “M3” with “SAVE” key to realize this function
Store unit price
Use change function
5. Change
Press “CG” key ,enter into the CHANGE function state,you can see the WEIGHT screen displays
"CHA",the TOTAL PRICE screen displays “ ----” ; at this moment,press "0~9"and“ . ”Key to
input the payment amounton the UNIT PRICE screen,then press “CE” key to clean the amount
(at this time,the TOTAL PRICE screen displays ---- again);When the payment amount is
bigger than the actual total amount,the TOATL PRICE screen will display the change
amount.Contrarily,when the payment amount is smaller than the actual total amount,the
TOTAL PRICE screen will display“ ---- ” ,it means it is invalid.
Press “CG” key again ,return to the normal weighing state.
6. Accumulation
1)“M+” Put the articles on the pan,input Uint price,press “M+”,the WEIGHT screen will display
"Add-"and “M+”mark,the UNIT PRICE screen will display times accumulated,theTOTAL
screen will display the total price accumulated,press“ M+” again ,the WEIGHT screen
displays "TOTAL",the UNIT PRICE and TOTAL PRICE screen will keep the same.
If theTotal price is Zero,the scale will not accumulate and only show“ M+” related information,
after the WEIGHT screen displays zero,repositive the articales on the pan,input the Unit price
again,then press “M+”, and it is efective.
At any situation,press “M+”to check the accumulated amount,the WEIGHT screen will
display TOTAL,the UNIT PRICE screen will display times accumulated,TOTAL screen
will display total price,press any number key(except ON,OFF,CG key),the scale
will return to normal weighing state.
When the accumulation amount exceed the upper limit,the TOTAL PRICE screen will
display “FULL”the UNIT PRICE and WEIGHT screen will display"-----".
2)“MC” When the screen displays “M+”,you can clear the accumulated data and quit accumulation
mode by pressing “MC”,then “M+”mark will disappear.
Attention:when the screen displays “M+”(the Unit price screen shows accumulated times,
Total screen show total amount),if you press “CG” key,and input the payment,when the
payment amount is bigger than total price,the scale will calculate the change amount
and display it in TOTAL screen.
Technical Data
|
Model |
3kg |
6kg |
15kg |
30kg |
Pan size: 200 x 280 mm Operation condition: Temperature 0-40 C,humidity<80%RH Power:DC Adaptor 8V/500mA,Battery 4V 4AH
|
|
|
Division |
D-L |
1g |
2g |
5g |
10g |
|
|
D-H |
0.5g |
1g |
2g |
5g |
||
Alarm
|
Warning message |
Reason |
|
---- (overweight) |
Exceed the weight range(over 9 division) |
|
"Err" is displayed |
The G.W beyond the sensor' s max weight |
|
Battery mark |
Not enough power |
